6 537494-001 — Removing and Replacing Memory
14 Push down the retaining clip on each end of the
memory socket to release the memory module.
15 Touching only the top edge of the memory module, lift
it out of the socket.
Replacing a Memory Module
1 Touching only the top edge of the memory module,
locate the notch on the bottom edge.
2 Look at the memory module socket for the tab that
matches the notch on the memory module.
IMPORTANT: The new (replacement) part may not look
the same as the original part, due to different
manufacturers or models. Hewlett-Packard always
provides quality parts that meet or exceed your original
computer specifications.
NOTE: Install the memory modules into the blue sockets
first, starting with the largest capacity module placed in
the socket closest to the processor on the motherboard.
NOTE: Each type of memory has a different notch
position. Incompatible memory modules cannot be
installed in the memory socket.