2–12 Troubleshooting
Problems and Solutions
Standby or Hibernation affects CD or DVD play
Initiating Standby or Hibernation while playing a CD or DVD may stop
the play or diminish the quality of the play.
■ Remove the CD or DVD from the drive before initiating Standby or
Hibernation.
■ If Standby or Hibernation is initiated while playing a CD or DVD,
resume from Standby or restore from Hibernation, then restart the
notebook.
DVD region error code is displayed
Change the regional setting on the drive. (There may be a limited amount
of times the regional setting can be changed.) For instructions, refer to
your model-specific documentation or, if you are using optional DVD
software, to your DVD software documentation.
320399-002.book Page 12 Thursday, June 19, 2003 1:17 PM
To Next Page
Loading...
