Calibrating a battery
When to calibrate
Even if a battery is heavily used, it should not be necessary to calibrate it more than once a month. It is
not necessary to calibrate a new battery. Calibrate a battery under the following conditions:
●
When battery charge displays seem inaccurate
●
When you observe a significant change in battery run time
●
When the battery has been unused for one month or more
How to calibrate
Three steps are involved in calibrating a battery: fully charging, fully discharging, and then fully
recharging.
Step 1: Charging the battery
A battery can charge whether the computer is off or in use, but it will charge faster when the computer
is off.
WARNING! Do not charge the computer battery while you are onboard aircraft.
To charge the battery:
1. Insert the battery into the computer.
2. Connect the computer to an AC adapter, optional power adapter, or optional docking device or
expansion product, and then plug the adapter or device into external power.
The battery light on the computer turns on.
3. Leave the computer plugged into external power until the battery is fully charged.
The battery light on the computer turns off.
Calibrating a battery 23
To Next Page
Loading...
Need help?
General
