Computer Setup—Main
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-9 Computer Setup—Main
Option Description
System Time Allows you to set system time.
System Date Allows you to set system date.
Language Allows you to select language.
Floppy Diskette A: Allows you to set drive A to:
●
Disabled
●
1.44 MB 3.5”
● Not Installed
1st Drive
2nd Drive
3rd Drive
4th Drive
For each, allows you to:
● Port Configuration (disable/enable)
●
(view only)
◦
Capacity (Size - HDD only)
◦ Transfer Mode
●
Smart Support - run HDD self-test for selected channel:
◦
SMART Status Check
◦ SMART Short Self-Test
◦
SMART Extended Self-Test
System Information (view only)
●
Installed Memory
●
Memory Bank 1
● Memory Bank 2
● Memory Bank 3
●
Memory Bank 4
●
BIOS Revision
● Core Version
●
Model Number
●
Product Number
●
Serial Number (press Enter to change)
●
Asset Tag (press Enter to change)
18 Chapter 3 Computer Setup (F10) Utility
To Next Page
Loading...
