Keyboard battery
Description Spare part number
2-cell, 25-WHr, 3.38-AHr, Li-ion battery (includes cable) 753704-005
Before removing the keyboard battery, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Disconnect the tablet from the keyboard base.
5. Remove the bottom cover (see
Bottom cover on page 64).
WARNING! To reduce potential safety issues, use only the battery provided with the keyboard, a
replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To
prevent loss of information, save your work or shut down the tablet through Windows before removing the
battery.
Remove the keyboard battery:
1. Disconnect the keyboard battery cable (1) from the keyboard system board.
2. Remove the eight Philllips PM1.9×2.4 screws (2) that secure the keyboard battery to the top cover.
Keyboard base replacement procedures 65
To Next Page
Loading...
