Power button board
Description Spare part number
Power button board for use in computers with 15-in displays (includes cable) 574513-001
Power button board for use in computers with 14-in displays (includes cable) 574514-001
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 58).
5. Remove the following components:
a. Switch cover and keyboard (see
Switch cover and keyboard on page 59)
b. Optical drive (see
Optical drive on page 64)
c. Speakers (see
Speakers on page 67)
d. Palm rest (see
Palm rest on page 69)
e. Hard drive (see
Hard drive on page 72)
f. Top cover (see
Top cover on page 83)
g. Display assembly (see
Display assembly on computers with 15-in displays on page 77 or
Display assembly on computers with 14-in displays on page 90)
Remove the power button board:
1. Position the top cover upside-down with the rear toward you.
Component replacement procedures 87
To Next Page
Loading...
