RTC battery
Description Spare part number
RTC battery 449137-001
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 58).
5. Remove the following components:
a. Switch cover and keyboard (see Switch cover and keyboard on page 59)
b. Palm rest (see
Palm rest on page 69)
c. Top cover on 14-in models (see
Top cover on page 83)
Remove the RTC battery:
1. Position the computer right-side up with the front toward you.
2. Remove the RTC battery from the socket on the system board.
Reverse this procedure to install the RTC battery.
Component replacement procedures 89
To Next Page
Loading...
