HP ProBook 445 G9 - HP Tamper Lock

Table 2-11 Service label components
Component
(1) HP product name
(2) Product ID
(3) Serial number
(4) Warranty period
Table 2-12 Service label components
Component
(1) HP product name
(2) Warranty period
(3) Product ID
(4) Serial number
● Regulatory labels—Provide regulatory information about the computer.
● Wireless certication
labels—Provide information about optional wireless devices and the approval
markings for the countries or regions in which the devices have been approved for use.
HP Tamper Lock
HP Tamper Lock oers an extra level of business protection by notifying you when you computer has been
tamper
ed with or the bottom cover has been removed.
HP Tamper Lock uses tamper detection sensors located on the bottom cover and internal storage. If a sensor
is triggered, you must enter a supervisor password to unlock the computer. This feature is disabled by
default. Conguration settings are available in Computer Setup (BIOS).
NOTE: HP Tamper Lock must be
congured at the factory and requires that you set a supervisor password
prior to use.
HP Tamper Lock 17