(7) Keyboard cable (ZIF)
(8) Card reader cable (ZIF) and tape
(9) Touchpad cable (ZIF)
(10) Backlight cable (ZIF)
(11) Fingerprint sensor cable (ZIF)
(12) Hard drive cable
2. Remove the four Phillips M2.0 × 4.0 screws (1) that secure the system board to the computer.
3. Remove the three Phillips M2.0 × 2.5 screws (2) that secure the system board to the computer.
4. Remove the broadhead Phillips M2.5 × 2.5 screw (3) that secures the system board to the computer.
Component replacement procedures 55
To Next Page
Loading...
