13. Slide the hinges toward the middle and then lift them from the enclosure (3).
The display hinges are available as spare part number L79189-001 for nonprivacy models and
L91710-001 for privacy models.
14. If it is necessary to replace the WLAN antennas, peel the antennas from the enclosure (1), remove the
cables from the clips in the bottom of the enclosure (2), and then remove the antennas and cables from
the enclosure (3).
WLAN antennas are available as spare part number L77283-001.
15. If it is necessary to remove or replace the display/camera cable, use the following steps:
Component replacement procedures 63
To Next Page
Loading...
