Display
Use the illustration and table to identify the display components.
Table 2-3 Display components and their descriptions
Component Description
(1) Ambient light sensor (select products only) Adjusts the brightness of the display, depending on the ambient
light.
(2) Internal microphones (2) Record sound.
(3) Camera light (select products only) On: One or more cameras are in use.
(4) Camera(s) (select products only) Allow(s) you to video chat, record video, and record still images.
Some cameras also allow a facial recognition logon to Windows,
instead of a password logon.
NOTE: Camera functions vary depending on the camera hardware
and software installed on your product.
(5) Camera privacy cover (select products only) By default, the camera lens is uncovered, but you can slide the
camera privacy cover to block the camera's view. To use the camera,
slide the camera privacy cover in the opposite direction to reveal the
lens.
NOTE: If you have both front-facing and rear-facing cameras, when
one camera lens is revealed and ready to use, the other is concealed.
(6) WLAN or WWAN antennas* (select products only) Send and receive wireless signals to communicate with wireless local
area networks (WLANs) or wireless wide area networks (WWANs).
(7) WLAN antennas* (select products only) Send and receive wireless signals to communicate with wireless local
area networks (WLANs).
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the
antennas free from obstructions.
8 Chapter 2 Components
To Next Page
Loading...
