RTC battery
To remove the RTC battery, use this procedure and illustration.
Table 6-4 RTC battery description and part number
Description Spare part number
RTC battery L13694-001
Before removing the RTC battery, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 31).
2. Remove the bottom cover (Bottom cover on page 31).
3. Remove the battery (see Battery on page 38).
Remove the RTC battery:
1. Disconnect the battery cable from the system board (1).
2. Use a tool to release the battery from the computer (2).
Reverse this procedure to install the RTC battery.
Speakers
To remove the speakers, use this procedure and illustration.
Table
6-5 Speaker description and part number
Description Spare part number
Speaker Kit M30648-001
Before removing the speakers, follow these steps:
Component replacement procedures 43