HP ProBook 6465b

8. Lift the keyboard connector latch (2), and then disconnect the keyboard cable from the system
board (3).
9. Remove the keyboard.
Reverse this procedure to install the keyboard.
Bottom cover from top cover
Description Spare part number
Bottom cover 641838-001
Top cover (includes a 2-button touchpad and fingerprint reader) 642741-001
Top cover (includes a 2-button touchpad without a fingerprint reader) 642742-001
Top cover (includes a 4-button touchpad with a fingerprint reader) 642743-001
Top cover (includes a 4-button touchpad without a fingerprint reader) 642746-001
Before removing the bottom cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
70 Chapter 4 Removal and replacement procedures