2-25
Installing the Switch
Sample Network Topologies
Stacking the Switch
The 2520G-PoE switches can be connected together, through standard
network connections, and managed through a single IP address. Up to 16
switches can be connected together in such a “virtual stack”.
You identify a 2520G-PoE Switch as the “Commander” and give that switch an
IP address. Up to 15 other switches in the network can then easily be
configured as Members of the stack and managed through the Commander’s
IP address. The management includes Telnet access and Web browser
interface access to the Commander and to each Member switch through the
Commander.
For more information on stacking your switch, see the Management and
Configuration Guide, which is on the ProCurve Web site at www.hp.com/go/
procurve/manuals.
To Next Page
Loading...
Need help?
General