HP ProCurve 5406zl User Manual

3-67
Multiple Instance Spanning-Tree Operation
Troubleshooting an MSTP Configuration
Figure 3-32. Example of show spanning-tree debug-counters instance ports Command Output for One Port
in the CIST Instance
HP Switch(config)# show spanning-tree debug-counters instance 0 ports a15
Status and Counters - CIST Port(s) Debug Counters Information
MST Instance ID : 0
Port : A15
Counter Name Value Last Updated
--------------------------- ---------- -----------------
Invalid BPDUs 0
Errant BPDUs 0
MST Config Error BPDUs 0
Looped-back BPDUs 0
Starved BPDUs 0
Exceeded Max Age BPDUs 0
Exceeded Max Hops BPDUs 0
Topology Changes Detected 1 02/09/07 17:40:59
Topology Changes Tx 3 02/09/07 17:41:03
Topology Changes Rx 2 02/09/07 17:41:01
Topology Change ACKs Tx 0
Topology Change ACKs Rx 0
TCN BPDUs Tx 0
TCN BPDUs Rx 0
CFG BPDUs Tx 0
CFG BPDUs Rx 0
RST BPDUs Tx 0
RST BPDUs Rx 0
MST BPDUs Tx 5 02/09/07 17:41:03
MST BPDUs Rx 173540 02/13/07 18:05:34

HP ProCurve 5406zl Specifications

General

Product Name	HP ProCurve 5406zl
Category	Switch
Layer	Layer 3
Operating Temperature	32°F to 131°F (0°C to 55°C)
Operating Humidity	15% to 95% non-condensing
Management	SNMP, CLI
Power Supply	Redundant power supplies (optional)
Memory	128 MB flash, 512 MB SDRAM