HP ProCurve 5406zl User Manual

5-56
Quality of Service: Managing Bandwidth More Effectively
Globally-Configured QoS
Example. In this example, 802.1p priorities are assigned to packets received
in VLANs 1, 20, 30, and 40.
Figure 5-22. Displaying the VLANs Available for QoS Prioritization
Enter the following commands to mark VLAN packets that match the specified
VLAN IDs with an 802.1p priority:
Syntax: no vlan < vid > qos
Removes the specified VLAN-ID as a QoS classifier and resets
the priority for that VLAN to No-override.
Syntax: show qos vlan-priority
Displays a listing of the QoS VLAN-ID classifiers currently
in the running-config file, with their priority data.
HP Switch(config)# show vlans
Status and Counters - VLAN Information
Maximum VLANs to support : 256
Primary VLAN : DEFAULT_VLAN
Management VLAN :
VLAN ID Name | Status Voice Jumbo
------- -------------------------------- + ---------- ----- -----
1 DEFAULT_VLAN | Port-based No No
20 VLAN_20 | Static No No
30 VLAN_30 | Static No No
40 VLAN_40 | Static No No
Mark
VLAN 1
packets
with
priority 2.
Mark VLAN 20 and 30
packets with priority 5.
Mark VLAN 40 packets
with priority 7.

HP ProCurve 5406zl Specifications

General

Product Name	HP ProCurve 5406zl
Category	Switch
Layer	Layer 3
Operating Temperature	32°F to 131°F (0°C to 55°C)
Operating Humidity	15% to 95% non-condensing
Management	SNMP, CLI
Power Supply	Redundant power supplies (optional)
Memory	128 MB flash, 512 MB SDRAM