EasyManuals Logo

HP ProCurve 5412ZL User Manual

HP ProCurve 5412ZL
460 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #406 background imageLoading...
Page #406 background image
8-10
Classifier-Based Software Configuration
Traffic Classes
SAv6/prefix-length | DAv6/prefix-length Matches
packets received from, or destined to, an IPv6
subnet or a group of IPv6 addresses defined by the
prefix length. Enter the prefix length for an IPv6
SA/DA in CIDR format by using the number of
significant bits; for example:
2001:db8:2620:212::01b4/64.
An IPv6 prefix-length is applied to an SA/DA in a
match/ignore statement to define which bits in a
packet’s SA/DA must exactly match the specified
SA/DA and which bits need not match.
For example, 2001:db8:2620:212::01b4/64 means
that the leftmost 64 bits in a 128-bit IPv6 source
or destination address in a packet header must
match the same bit set in the specified IPv6
address (in this case, 2001:db8:2620:212::01b4).
For more information, see “Using CIDR Notation
for IPv4/IPv6 Addresses” on page 8-20.
An IPv6 prefix-length is applied from left to right,
starting from the leftmost bits.
Example: 2001:db8::0001:2620:a03:e102:127/64
and 2001:db8::1:244:17ff:feb6:d37d/64 both
match IPv6 addresses with a network prefix of
2001:db8:0000:0001.
[ ip-dscp codepoint ]
(Optional) Matches the six-bit DSCP codepoint in
IPv4 or IPv6 packets to further define match criteria.
Valid values for codepoint are one of the following:
- Numeric equivalent of a binary DSCP bit set from
0 (low priority) to 63 (high priority)
-ASCII standard name for a binary DSCP bit set:
af11 (001010)af42 (100100)
af12 (001100) af43 (100110)
af13 (001110)ef
(101110)
af21 (010010)cs1
(001000) = precedence 1
af22 (010100)cs2
(010000) = precedence 2
af23 (010110)cs3
(011000) = precedence 3
af31 (011010)cs4
(100000) = precedence 4
af32 (011100)cs5
(101000) = precedence 5
af33 (011110)cs6
(110000) = precedence 6
af41 (100010)cs7
(111000) = precedence 7
default
(000000)

Table of Contents

Other manuals for HP ProCurve 5412ZL

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProCurve 5412ZL and is the answer not in the manual?

HP ProCurve 5412ZL Specifications

General IconGeneral
Input Voltage100-240 VAC
Jumbo Frame SupportYes
LayerLayer 3
Port Type10/100/1000Base-T, SFP
ManagementCLI, Web, SNMP

Related product manuals