HP ProCurve Planning And Implementation Guide

3-11
Planning
Planning Your PoE Configuration
Planning
Figure 3-8. Example of an HP 610 EPS Powering Two Modules
In this example there are two modules connected to the HP 610 EPS. Each
module will be supplied with 408 watts of PoE power to be distributed to each
modules 24 ports at 15.4 watts per port, because each module is connected to
a different pair. One module to one port of pair A and one module to one port
of pair B.
hp procurve
PoE
xl module
J8161A
xl
module
PoE
Link
Mode
1
2
3
4
56
PoE-Ready 10/100-TX Ports (1-24)  all ports are HP Auto-MDIX
13
14
20
19121110
9
8
7
15
21
16
22 23 24
17 18
Std
PoE
PoE
EPS
Status
LED Mode
Mode
Link
hp procurve
PoE
xl module
J8161A
xl
module
PoE
Link
Mode
1
2
3
4
56
PoE-Ready 10/100-TX Ports (1-24)  all ports are HP Auto-MDIX
13
14
20
19121110
9
8
7
15
21
16
22 23 24
17 18
Std
PoE
PoE
EPS
Status
LED Mode
Mode
Link
HP ProCurve Switch
5300xl
HP ProCurve Switch
xl PoE modules
HP 610 RPS/EPS
Source of
Power
Watts
Available
# of Ports Powered and
Average Watts/Port
Redundant # of Ports
Powered and Average Watts/
Port
External PoE
Power
Supply
408/each
module
24 @ average 15.4 W each None

HP ProCurve Specifications

General

Brand	HP
Model	ProCurve
Category	Switch
Language	English