HP ProDesk 400 G2.5 - Page 8

EL-MF877-00 Page 8
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure30 Remove FG screw
(screw driver PH2)
Figure31 Disconnect fan connector
Figure32 Disconnect the L/N wire connector
Figure33 Cut the cable tie
(Micro shear YN-3)
Figure34 Remove PCB screw
Figure35 Remove plastic cover
Figure36 Remove AC inlet
Figure37 Remove the FAN
(screw driver PH2)