HP ProDesk 400 G5

EL-MF877-00 Page 16
Template Revision B
PSG instructions for this template are available at EL-MF877-01
15
Release front antenna
screw then pull up
antenna cable.
Press rear antenna
cover latch then pull up
cover from chassis.
Release rear antenna
screw then pull up
antenna cable.
See Photo 41, 42, 43,
44, 45
Screw tool:
Cross screwdriver
OD 3.0mm.
Photo 41
Photo 42
Photo 43
Photo 45
1
2
Photo 44