HP ProDesk 600 G1 Small Form Factor Hardware Reference Guide

●
You can also install a 2.5-inch hard drive into a 3.5-inch drive bay using an adapter bracket
similar to the example shown below.
◦
Slide the drive into the bay adapter bracket, ensuring the connector on the drive is fully
inserted into the connector on the adapter bracket.
◦
Secure the drive to the bay adapter bracket by installing four black M3 adapter bracket
screws through the sides of the bracket into the drive.
ENWW Installing and removing drives 43

HP ProDesk 600 G1 Small Form Factor Specifications

General

Brand	HP
Model	ProDesk 600 G1 Small Form Factor
Category	Desktop
Language	English