HP ProDesk 600 G1 Small Form Factor Hardware Reference Guide

9. To install a hard drive, you must transfer the silver and blue isolation mounting guide screws
from the old hard drive to the new hard drive.
10. Align the guide screws with the slots on the chassis drive cage, press the hard drive down into
the bay, then slide it forward until it stops and locks in place.
80 Chapter 3 Small Form Factor (SFF) hardware upgrades ENWW

HP ProDesk 600 G1 Small Form Factor Specifications

General

Brand	HP
Model	ProDesk 600 G1 Small Form Factor
Category	Desktop
Language	English