HP ProDesk 600 G4 User Manual

M.2 PCIe solid state drive (SSD)
For a list of available solid-state drives, see Computer major components on page 3.
1. Prepare the computer for disassembly (Preparation for disassembly on page 14).
2. Remove the access panel (Access panel on page 15).
3. In models with a hard drive, remove the hard drive (Hard drive on page 19) and drive cage Drive cage
on page 21.
4. Locate the M.2 SSD on the system board.
5. Remove the screw (1) securing the SSD to the system board, and then pull the SSD from the socket on
the system board (2).
To replace the solid-state drive module, reverse the removal procedures.
22 Chapter 4 Removal and replacement procedures

HP ProDesk 600 G4 Specifications

General

RAM	Up to 64 GB DDR4-2666 SDRAM
Chipset	Intel Q370
Processor	Intel Core i3/i5/i7
Storage	HDD or SSD
Graphics	Intel UHD Graphics 630
Operating System	Windows 10 Pro, Windows 10 Home, FreeDOS
Form Factor	Small Form Factor
Ports	USB 3.1, USB-C, DisplayPort, RJ-45, audio
Dimensions	27 x 29.6 x 9.5 cm