3. Connect one end of audio cable to the audio connector on the monitor and connect the other end of the cable
to an audio output connector on the rear panel of the computer (cable not provided).
4. Connect the USB upstream cable’s Type B connector to the USB upstream port on the rear of the monitor and
the cable’s Type A connector to the USB downstream port on the source device.
5. Connect one end of the AC power cord to the power connector on the rear of the monitor, and the other end
to an AC outlet.
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical
outlet, grasp the cord by the plug.
8 Chapter 3 Setting up the monitor
To Next Page
Loading...
