Connecting USB devices
USB ports are used to connect devices such as a digital camera, USB keyboard, or USB mouse. There are two
downstream USB ports on the rear of monitor.
NOTE: You must connect the USB upstream cable from the computer to the monitor to enable the USB
downstream ports on the monitor. See step 4 in Connecting the cables on page 7.
Removing the monitor stand
You can remove the monitor panel from the stand to install the panel on a wall, a swing arm, or other mounting
fixture.
CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and all cables are
disconnected.
1. Disconnect and remove all cables from the monitor.
2. Lay the monitor face down on a flat surface covered by a clean, dry cloth.
3. Press down on the release latch (1) and slide the stand out of the slot on the display head (2).
Connecting USB devices 11
To Next Page
Loading...
