To Next Page

To Previous Page

Adjusting the monitor

Tilt the monitor's panel forward or backward to set it to a comfortable eye level. The monitor can be tilted from

-5° to +22°.

Turning on the monitor

1. Press the power button on the computer to turn on the computer.

2. Press the power button on the front of the monitor to turn it on.

CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a

prolonged period of time.* To avoid burn-in image damage on the monitor screen, you should always activate

a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image

retention is a condition that may occur on all LCD screens. Monitors with a “burned-in image” are not covered

under the HP warranty.

* A prolonged period of time is 2 consecutive hours of a static image.

NOTE: If pressing the power button has no effect, the Power Button Lockout feature may be enabled. To disable

this feature, press and hold the monitor power button for 10 seconds.

NOTE: You can disable the power LED in the OSD menu. Press the Menu button on the front of the monitor, and

then select Power Control > Power LED > Off.

When the monitor is powered on, a Monitor Status message is displayed for five seconds. The message shows

which input is the current active signal, the status of the auto-switch source setting (On or Off; factory default is

On), the current preset display resolution, and the recommended preset display resolution.

The monitor automatically scans the signal inputs for an active input and uses that input for the display.

10 Chapter 3 Setting up the monitor

Questions and Answers:

Need help?

Do you have a question about the HP ProDisplay P222c and is the answer not in the manual?

HP ProDisplay P222c Specifications

General

3D	No
Panel type	VA
Pixel pitch	0.248 x 0.248 mm
Response time	9 ms
Display diagonal	21.5 \
Display technology	LED
Native aspect ratio	16:9
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	3000:1
Display number of colors	-
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1440 x 900 (WXGA+), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080)
Tilt up angle range	-5 - 22 °
Certification	CE; CB; KC/KCC; NOM; PSB; ICE; TUV-S; ISO 9241-307; EAC; UL; CSA; PSB; ISC; CCC; CEL; CECP; SEPA; TCO Certified; ISC; VCCI; FCC; BSMI; Vietnam MEPS; Australian-New Zealand MEPS; WEEE; SmartWay Transport Partnership (NA)
Product color	Black
Country of origin	China
Market positioning	Business
RMS rated power	2 W
USB hub version	2.0
HDMI ports quantity	0
USB Type-A downstream ports quantity	3
AC input voltage	100 - 240 V
Power consumption (max)	37 W
Power consumption (standby)	0.5 W
Power consumption (typical)	24 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, DisplayPort, USB, VGA

Weight and Dimensions