HP ProLiant DL180 G6 - Page 133

Connectors, switches, and LEDs 133
Item
Designator
Description
21 B1 3 V CMOS battery (CR2032)
22 J76 Power backplane control connector
23 J56 LCD connector (optional)
24 J53 Front panel USB 2.0 port 0/1
25 J42 Front panel header
26 J29 TPM connector
27 J27 System maintenance jumper
28 SATA SATA connectors
29 J31 PCIe slot
Jumpers
The system board contains a system maintenance jumper (J27). Table 21 describes the jumper
settings.
Table 21 System Maintenance Jumper Setting (J27)
Jumper
Status (default=off)
A Clear CMOS
B Clear password
C Recovery BIOS
D Recovery BMC
E RTC reset