Removal and replacement procedures 83
PCI riser card expansion slot
The one PCIe riser card attached to the PCI cage converts the functionality of the system board
expansion slot to the slot positioned at a 90° angle from the system board.
NOTE: Users have the option to replace the standard riser card in slot 1a&1b with other four models
using the dual PCIe x8 riser card, single PCIe x16 riser card, dual PCI-X riser card, or PCIe x16 &
dual PCI-X riser card option kit. This will allow support for PCIe x8, PCIe x16, and PCI-X devices.
Figure 48 Three PCIe x8 Riser Card Connector Location
• Three slots PCIe riser card (Three x8 link with x8 slots)
Figure 49 Two PCIe x8 Riser Card Connector Location
• Two slots PCIe riser card (Two x8 link with x8 slots)
To Next Page
Loading...
