HP ProLiant DL180 G6 - Page 85

Removal and replacement procedures 85
PCI cage
The server supports three types of PCI cages. They are the standard PCI cage, the HDD PCI cage, the
ODD PCI cage.
The table below identifies the PCI cages by their function and shows their corresponding server type
and supported riser cards.
PCI cage
Riser Card
System model
Standard PCI Cage Slot 1a&1b:
dual PCIe x8 riser card for standard PCI
cage;
or three PCIe x8 riser card
or PCIe x16 + dual PCI-X riser card
or dual PCI-X riser card
or single PCIe x16 riser card (Full-height
/ Full-length Side)
Slot 2:
single PCIe x16 riser card (Low Profile)
4 3.5” HDD model;
8 3.5” HDD model;
8 2.5” HDD model;
12 3.5” HDD model;
25 2.5” HDD model;
Rear HDD PCI cage Slot 2:
single PCIe x16 riser card (Low Profile)
12 3.5” HDD model
Rear Optical Disc Drive
PCI cage
Slot 1a&1b:
dual PCIe x8 riser card for Optical Disc
Drive PCI cage
4 3.5” HDD model;
8 3.5” HDD model;
8 2.5” HDD model;
12 3.5” HDD model;
25 2.5” HDD model;