Removal and replacement procedures 56
6.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution.
7. Install the heatsink.
8. Install the air baffle ("Air baffle" on page 28).
9. Install the access panel ("Access panel" on page 28).
System board
To remove the component:
1. Power down the server (on page 25).
2. Remove the server from the rack (on page 26).
3. Remove the access panel ("Access panel" on page 28).
4. Remove the air baffle ("Air baffle" on page 28).
5. Remove the PCI riser board assembly ("PCI riser board assembly" on page 42).
To Next Page
Loading...
