EasyManua.ls Logo

HP ProLiant DL360 - Page 170

HP ProLiant DL360
177 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Index
Index-6 Compaq ProLiant DL360 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: MicroMachines Part Number: 169616-006 Last Saved On: 12/21/01 9:08 AM
Parallel Port X Address Assignment
Conflict 4-13
PCI slots powered down. 4-14
Permanently disabled 4-41
Power Fault On Processor Bus X 4-12
Power Supply Failure, Power Supply
Unplugged, or Power Supply Fan
Failure 4-14
Primary Disk Port Address Assignment
Conflict 4-18
Primary Fixed Disk Port Assignment
Conflict 4-19
Primary power supply failure 4-14
Processor Configuration Invalid 4-10
Processor Power Module has lost
Redundancy 4-11
Processor PPM Failed 4-11
Processor PPM has lost Redundancy 4-11
RESUME - F1 key 4-27
RIS copies between drives do not match 4-47
ROM Error 4-9
Run System Configuration Utility 4-27
SCSI cable error detected 4-15
SCSI Port X Drive ID X
failed - Replace 4-48
firmware needs upgrading 4-48
has exceeded threshold(s) 4-47
has loose cable 4-48
is not stamped for monitoring 4-47
replaced on a good volume 4-48
RIS copy mismatch 4-48
SCSI Port X drive ID Y firmware needs
upgrading 4-48
Secondary Disk Port Address Assignment
Conflict 4-19
Set configuration command issued 4-48
Slot X Drive Array
Array Accelerator Memory Size Change
Detected 4-16
Capacity Expansion Process is temporarily
disabled 4-17
Drive(s) disabled due to failure during
expand 4-18
New Logical Drive(s) Attachment
Detected 4-16
Obsolete data found in Array
Accelerator 4-19
Physical Drive Position Change(s)
Detected 4-15
ProLiant Storage System Not Responding
SCSI port (y) 4-19
Resuming logical drive expansion
process 4-18
SMART Drive Detects Imminent
Failure 4-15
Slot x Drive Array Controller Failure 4-21
Slot x Drive Array Option ROM is Not
Programmed Correctly 4-17
Snoop Rules SRAM Failure 4-12
Soft Firmware Upgrade required 4-48
System Board Failure 4-9
System Options Not Set 4-9
System Processor Failed/ Mapped out 4-11
Tag Update Rules SRAM Failure 4-12
Temperature violation detected 4-13
Time & Date Not Set 4-9
Unable to communicate with drive on SCSI
Port x 4-49
Unknown disable code 4-49
Unrecoverable read error 4-49
Unsupported Processor Detected System
Halted 4-9
Voltage Regulator Module for Processor
X 4-11
Warning bit detected 4-49
Warning, Drive Write Cache enabled
on X 4-49
Write memory error 4-49
Wrong Accelerator 4-49
Event List See also IMD
defined 4-52
printing 4-51
viewing 4-51
event messages, defined 4-53
event type
ASR-2, system lockup 4-54
Fan Failure 4-53
machine environment
Fan Inserted 4-53
Fan Removed 4-53
Fans Not Redundant 4-53
Overheat Condition 4-53
main memory
Correctable Error threshold exceeded 4-53
Uncorrectable Error 4-53
operating system
automatic OS shutdown 4-54
system crash 4-54
PCI bus error 4-53
power subsystem
power module failure 4-54
power supply failure 4-54
power supply inserted 4-54
power supply not redundant 4-54
power supply removed 4-54
system configuration battery low 4-54
processor
Correctable Error Threshold exceeded 4-53
Host Bus Error 4-53
Uncorrectable Error 4-53
events log
description 4-3

Related product manuals