Diagnostics and Troubleshooting
4-4 Compaq ProLiant DL360 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: MIcroMachines Part Number: 169616-006 Last Saved On: 12/21/01 9:05 AM
Table 4-1: Diagnostic Tools continued
Tool What it is How to run it
System
Configuration Utility
Utility to easily configure the
hardware installed in or
connected to the server.
Specifically, it can:
• Resolve resource
conflicts in areas such as
memory, port addresses,
and interrupts (IRQs)
• Configure PCI boards
automatically
• Provide switch and
jumper settings
• Manage installation of
memory, processor
upgrades, and mass
storage devices such as
hard drives, tape drives,
and diskette drives
• Store configuration
information in nonvolatile
memory
• Assist in installation of an
operating system
• Assist in running
diagnostic tools such as
TEST and INSPECT
If the server has bootable CD-ROM drive, run
Compaq System Configuration Utility directly
from Support Software CD supplied with
SMART Controller Option Kit, or SmartStart
and Support Software CD supplied with
server. Use the CD supplied for latest version
supporting SMART Controller.
If the server does not have a bootable
CD-ROM drive, create diskettes with latest
version of the System Configuration Utility
from Support Software CD, or SmartStart and
Support Software CD.
To Next Page
Loading...
