HP ProLiant DL360 - 200 - 299, Memory Test Error Codes

Diagnostics and Troubleshooting
Compaq ProLiant DL360 Server Maintenance and Service Guide 4-31
COMPAQ CONFIDENTIAL Codename: MIcroMachines Part Number: 169616-006 Last Saved On: 12/21/01 9:05 AM
200 – 299, Memory Test Error Codes
The 200 series of diagnostic error codes identifies failures with the memory subsystem.
Table 4-4: Memory Test Error Codes
Error Code Description Recommended Action
200-xx Invalid memory configuration. Reinsert memory modules in correct location
and retest.
201-xx Memory machine ID test failed.
202-xx Memory system ROM checksum
failed.
1. Replace the system ROM and retest.
2. Replace the processor board and retest.
3. Replace the memory expansion board and
retest.
203-xx Memory write/read test failed.
204-xx Memory address test failed.
205-xx Walking I/O test failed.
206-xx Increment pattern test failed.
1. Replace the memory module and retest.
2. Replace the processor board and retest.
3. Replace the memory expansion board and
retest.
207-xx Invalid memory
configuration-check DIMM
installation. DIMMs installed have
8K refresh.
Replace DIMMs.
208-xx Invalid memory speed
detected-check DIMM installation.
Slow DIMMs may cause data loss.
Replace DIMMs with timing greater than 60 ns.
209-01
209-02
209-03
209-89
RAM long test failed.
Error while saving test block.
Error while restoring test block.
ECC error during testing.
1. Replace the memory module/board and
retest.
2. Replace the system board and retest.
3. Replace the memory expansion board and
retest.
210-xx Random pattern test failed. 1. Replace the memory module and retest.
2. Replace the processor board and retest.
3. Replace the memory expansion board and
retest.
continued