Option ROM Configuration for Arrays 12
The ORCA main menu appears.
3. Select Create Logical Drive.
The screen displays a list of all available (unconfigured) physical drives and the valid RAID options for
the system.
4. Press the arrow keys, spacebar, and Tab key to navigate the screen and set up the logical drive,
including an online spare drive, if one is required.
5. Press the Enter key to accept the settings.
6. Press the F8 key to confirm the settings and save the new configuration.
After several seconds, the Configuration Saved screen appears.
7. Press the Enter key to continue.
8. (Optional) To create additional logical drives, repeat steps 3 through 7.
9. Format the logical drive.
o If you have not yet installed the operating system, format the logical drive when you install the
operating system.
o If the operating system is already installed, format the logical drive as described in the operating
system documentation.
Installing a license key with ORCA
If the controller supports SAAP, you can use ORCA to install the license key and activate SAAP functionality.
For more information, see "About SAAP (on page 8)."
To Next Page
Loading...
Need help?
General
