HP Array Configuration Utility 54
To determine which parameters can be queried, use the help feature of the CLI ("The help command" on
page 57).
Hiding warning prompts
When you enter a command for an operation that can potentially destroy user data, the CLI displays a
warning and prompts you for input (a y or an n) before continuing the operation. This situation is undesirable
when running batch file scripts. To prevent warning prompts from being displayed, use the term forced as
a parameter.
Example command:
ctrl ch="Lab4" ld 1 delete forced
Keyword abbreviations
Several commonly used keywords in the ACU CLI have acceptable abbreviations, as shown in the following
table. For a complete list of abbreviations, enter help shorthand in the ACU CLI.
Keyword
Abbreviation in ACU
CLI
Keyword
Abbreviation in
ACU CLI
ai mnpdelay mnpd
allunassigned
all nobatterywritecache nbwc
arrayaccelerator
aa parallelscsi ps
cacheratio
cr physicaldrive pd
chassisname*
ch* postprompttimeout ppto
csn preferredpathmode ppm
chassisslot
chs queuedepth qd
configurationmode
cm raid1writebuffering r1wb
connectionname
cn rebuildpriority rp
controller
ctrl redundantcontroller rc
cp serialnumber sn
degradedperformancemode
dpo spareactivationmode sam
drivetype
dt ssdphysicaldrive ssdpd
drivewritecache
dwc stripesize ss
elevatorsort
es surfaceanalysiseventnotify saen
enclosure
enc surfacescandelay ssd
exitonerror
eoe surfacescanmode ssm
ep sufacescanpriority sp
inconsistencyrepairpolicy
irp surfacescanschedule sss
licensekey
lk tapedrive td
logicaldrive
ld waitforcacheroom wfcr
*The CLI also uses this keyword and abbreviation for the terms box name and RAID array ID.
The show command
The show command enables you to obtain information about a device.
Syntax:
<target> show [detail]|[status]
To Next Page
Loading...
