HP ProLiant DL380 Generation 3 - Page 37

Removal and Replacement Procedures 37
4. Remove the diskette drive.
To replace the component, reverse the removal procedure.
Universal Media Bay Adapter Board
To remove the component:
1. Power down the server.
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 16
, "Removing the Server from the Rack" on page 18).
3. Remove the access panel ("Removing the Access Panel" on page 19
).
4. Remove the CD-ROM drive, if installed ("CD-ROM Drive" on page 35
).
5. Remove the CD-ROM drive blank, if installed ("CD-ROM Drive Blank" on
page 21
).
HP CONFIDENTIAL
File Name: 291916-6.doc Last Saved On: 2/5/04 2:26 PM