HP ProLiant DL380 Generation 3 - Page 38

38 HP ProLiant DL380 Generation 3 Server Maintenance and Service Guide
6. Remove the Universal Media Bay adapter board.
To replace the component, reverse the removal procedure.
CD Ejector Assembly
To remove the component:
1. Power down the server.
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 16
, "Removing the Server from the Rack" on page 18).
3. Remove the access panel ("Removing the Access Panel" on page 19
).
4. Remove the CD-ROM drive, if installed ("CD-ROM Drive" on page 35
).
5. Remove the CD-ROM drive blank, if installed ("CD-ROM Drive Blank" on
page 21
).
6. Remove the diskette drive ("Diskette Drive" on page 36
).
7. Remove the Universal Media Bay adapter board ("Universal Media Bay
Adapter Board" on page 37
).
HP CONFIDENTIAL
File Name: 291916-6.doc Last Saved On: 2/5/04 2:26 PM