HP ProLiant DL380 Generation 3 - Page 40

40 HP ProLiant DL380 Generation 3 Server Maintenance and Service Guide
Front Fan Bracket
To remove the component:
1. Power down the server.
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 16
, "Removing the Server from the Rack" on page 18).
3. Remove the access panel ("Removing the Access Panel" on page 19
).
4. Remove the front bracket.
5. Remove all hot-plug fans from the front fan bracket.
To replace the front fan bracket, reverse the removal steps and press down on the
top of each fan to be sure it is seated properly.
SCSI Terminator
To remove the component:
1. Power down the server.
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 16
, "Removing the Server from the Rack" on page 18).
3. Remove the access panel ("Removing the Access Panel" on page 19
).
HP CONFIDENTIAL
File Name: 291916-6.doc Last Saved On: 2/5/04 2:26 PM