Removal and Replacement Procedures 41
4. Remove the front fan bracket ("Front Fan Bracket" on page 40).
IMPORTANT: For this procedure, you do not need to remove the hot-
plug fans from the front fan bracket. When reinstalling the front fan
bracket, press the top of each fan to be sure it seats securely.
5. Remove the SCSI terminator.
To replace the component, reverse the removal procedure.
SCSI Backplane
To remove the component:
1. Power down the server.
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 16
, "Removing the Server from the Rack" on page 18).
3. Remove the access panel ("Removing the Access Panel" on page 19).
4. Remove all hot-plug SCSI hard drives ("Hot-Plug SCSI Hard Drive" on page
19
).
5. Remove the tape drive, if installed ("Universal Hot-Plug Tape Drive" on
page 23
).
6. Remove the front fan bracket ("Front Fan Bracket" on page 40
).
HP CONFIDENTIAL
File Name: 291916-6.doc Last Saved On: 2/5/04 2:26 PM
To Next Page
Loading...
