HP ProLiant DL380 Generation 3 - Page 52

52 HP ProLiant DL380 Generation 3 Server Maintenance and Service Guide
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 16
, "Removing the Server from the Rack" on page 18).
3. Remove the access panel ("Removing the Access Panel" on page 19
).
4. Remove the front fan bracket ("Front Fan Bracket" on page 40
).
IMPORTANT: For this procedure, you do not need to remove the hot-
plug fans from the front fan bracket. When reinstalling the front fan
bracket, press the top of each fan to be sure it seats securely.
5. Remove all hot-plug power supplies ("Hot-Plug Power Supply" on page 24).
6. Disconnect all power cables.
7. Remove the power converter module.
HP CONFIDENTIAL
File Name: 291916-6.doc Last Saved On: 2/5/04 2:26 PM