Removal and Replacement Procedures 53
NOTE: Cables are removed for clarity.
To replace the component, reverse the removal procedure.
Power Button/LED Board
To remove the component:
1. Power down the server.
2. Extend or remove the server from the rack ("Extending the Server from the
Rack" on page 16
, "Removing the Server from the Rack" on page 18).
3. Remove the access panel ("Removing the Access Panel" on page 19
).
4. Lift the Battery-Backed Write Cache Enabler bracket out of the chassis.
HP CONFIDENTIAL
File Name: 291916-6.doc Last Saved On: 2/5/04 2:26 PM
To Next Page
Loading...
