NOTE:
For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE:
Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section
of this QuickSpecs.
NOTE:
HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped
separately.
NOTE:
If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
NOTE:
All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard
drive blanks, they can order more using either P/N 666987-B21: HP SFF Gen8 Hard Drive Blank Kit or P/N 666986-B21: HP LFF Gen8
Hard Drive Blank Kit.
Entry Models
HP ProLiant DL380p Gen8
E5-2609 1P 4GB-R P420i
SFF 460W PS Entry Server
642121-001
Processor(s)
(1) Intel® Xeon® E5-2609 (2.4GHz/4-core/10MB/6.4GT-s QPI/80W) Processor
Cache Memory
10MB (1x10MB) Level 3
Memory
4GB (1x4GB) PC3L-10600R (DDR3-1333) Registered DIMMS
NOTE:
Total 24 DIMM slots available with processor upgrade (2P
configuration)
Network Controller
HP Ethernet 1Gb 4-port 331FLR Adapter
Storage Controller
HP Smart Array P420i/ZM (RAID 0/1/1+0)
Hard Drive
None ship standard
Internal Storage
Standard: 8 SFF SAS/SATA HDD Bays; includes 6 SFF hard drive blanks
Optional: +8 SFF (total of 16) SFF SAS/SATA HDD Bays
Optical Drive Bay
Optional Slim Optical Bay (SATA DVD-RW/ROM Optical Drive)
PCI-Express Slots
3 PCIe slots (+3 PCI slots available with upgrade option)
Power Supply
(1) HP 460W Common Slot Gold Hot Plug Power Supply (92% Efficient)
Fans
(4) (N+1 redundancy standard)
Management
HP iLO Management Engine (standard)
Optional: HP Insight Control
Energy Star
Meets Energy Star requirements
Form Factor
Rack (2U), HP Friction Rail Kit
NOTE:
The Friction Rail Kit is not compatible with the Cable Management Arm
option.
NOTE:
The HP 2U Gen8 Cable Management Arm is not available when using
Friction Rails.
NOTE: To assist in the installation of the server into the rack an optional
installation tool is available by contacting your local services representative
(p/n 695539-001).
Caution:
HP recommends that a minimum of two people are required for all
Rack Server installations. Please refer to your installation instructions for
proper tools and number of people to use for any installation.
Warranty
Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support
with next business day response.
QuickSpecs
HP ProLiant DL380p Generation8 (Gen8)
Pre-configured Models
DA - 14212 North America — Version 38 — July 22, 2013
Page 18
To Next Page
Loading...
Need help?
General
