Cache Memory
One of the following
depending on Model
20MB (1x20MB) Level 3
NOTE:
For Eight-core processors.
15MB (1x15MB) Level 3
NOTE:
For Six-core processors.
10MB (1x10MB) Level 3
NOTE:
For Quad-core processors.
5MB (1x5MB) Level 3
NOTE:
For Dual-core processors.
NOTE:
All processor models above list the L3 Cache associated with that particular processor.
Chipset
Intel® C600 Series Chipset
Intel® E5-2600 Processor Family
NOTE:
For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
.
Upgradeability
Upgradeable to 2 processors (16 Cores)
Up to 24 DIMM slots available for higher Memory capacity
FlexibleLOM connector for 1 Gigabit or 10 Gigabit networking options
8SFF Hard drive bays (total of 16 with optional upgrade)
Optional 3 slot riser (x16, x8, x8), or 2 slot (x16, x16)
NOTE:
To take advantage of the additional 3 PCI slot upgrade, the second processor must be installed.
Redundant Power Supply
Optical Drive (8SFF/8LFF only)
On System Management
Chipset
HP iLO (Firmware: HP iLO 4)
NOTE:
For more information, visit:
http://www.hp.com/go/ilo
Memory Protection
Advanced ECC
NOTE:
Advanced ECC uses single device data correction (SDDC) to detect and correct single and all multi-
bit error that occurs within a single DRAM chip. Both x4 and x8 SDDC are supported (x8 requires lockstep
mode).
Online Spare
NOTE:
Memory online spare mode (also known as rank spare mode) detects a rank that is degrading and
switches operation to the spare rank.
Lock-step mode
NOTE:
Memory Lockstep mode is used to correct a single x8 DRAM device failure on a DIMM. The DIMMs in
each paired memory channel must have identical HP part numbers.
QuickSpecs
HP ProLiant DL380p Generation8 (Gen8)
Standard Features
DA - 14212 North America — Version 38 — July 22, 2013
Page 3
To Next Page
Loading...
Need help?
General
