HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor
AZ885A
NOTE:
Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13731_na/13731_na.html
HP Server Console Switches
HP Server Console 0x2x8 Port Analog Switch
AF616A
HP Server Console 0x2x16 Port Analog Switch
AF617A
HP TAA 0x2x16xKVM Server Console G2 Switch
AF626A
NOTE:
Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/11834_na/11834_na.html
HP Server Console Switch G2 with Virtual Media & CAC
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
AF618A
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
AF619A
HP KVM CAT5 1-pack USB Interface Adapter
336047-B21
NOTE:
Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13475_na/13475_na.html
HP IP Console Switch G2 with Virtual Media & CAC
HP 1x4 USB/PS2 KVM Console Switch
AF611A
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
AF620A
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
AF621A
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
AF622A
NOTE:
Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13474_na/13474_na.html
Rail Kits
NOTE:
Gen8 rail kits have changed significantly from prior generation rail kits. Please
take a moment to review the installation documentation that comes with the server to
help you with the installation of your Gen8 server.
NOTE:
Rail kits are optional for DL380p Gen8 and are no longer included standard with
the server. Customers have the option to purchase their server without a rail kit.
NOTE:
Ball bearing rail kits contain telescoping rails which allow for in-rack
serviceability.
NOTE:
The HP 2U Gen8 Cable Management Arm is not available when using Friction
Rails.
NOTE:
To assist in the installation of the server into the rack an optional installation
tool is available by contacting your local services representative (p/n 695539-001).
Caution:
HP recommends that a minimum of two people are required for all Rack
Server installations. Please refer to your installation instructions for proper tools and
number of people to use for any installation.
HP 2U LFF Ball Bearing Gen8 Rail Kit with CMA
663480-B21
HP 2U SFF Ball Bearing Gen8 Rail Kit with CMA
663478-B21
HP 2U Small Form Factor Ball Bearing Gen8 Rail Kit
720863-B21
QuickSpecs
HP ProLiant DL380p Generation8 (Gen8)
Additional Options
DA - 14212 North America — Version 38 — July 22, 2013
Page 49
To Next Page
Loading...
Need help?
General
