To replace the component, reverse the removal procedure.
Air baffle
To remove the component:
CAUTION: For proper cooling do not operate the server withou
expansion slot covers, or blanks installed. If the server supports hot-p
the amount of time the access panel is open.
t the access panel, baffles,
lug components, minimize
1. Power down the server (on page 26).
2. Extend or remove the server from the rack ("Extend the server from th
the server from the rack
" on page 27).
3. Remove the access panel ("Access panel" on page 30).
4. Remove the PCI riser cage ("PCI riser cage" on page 38).
e rack" on page 25, "Remove
CAUTION: Do not detach the cable that connects the battery pack to the cach
Detaching the cable causes any unsaved data in the cache modu
e module.
le to be lost.
5. Remove the battery pack from the air baffle ("Removing the battery pack" on page 45).
the air baffle. 6. Remove
To replace the component, reverse the removal procedure.
Fan cage
To remove the component:
1. Power down the server (on page 26).
2. Extend or remove the server from the rack ("Extend the server from the rack" on page 25, "Remove
the server from the rack
" on page 27).
3. Remove the access panel ("Access panel" on page 30).
Removal and replacement procedures 39
To Next Page
Loading...
