HP ProLiant DL385p

NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13475_div/13475_div.html
(Worldwide)
HP IP Console Switch G2 with Virtual Media & CAC
HP 1x4 USB/PS2 KVM Console Switch AF611A
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software AF620A
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software AF621A
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software AF622A
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13474_div/13474_div.html
(Worldwide)
Rail Kits
NOTE: Rail kits are optional for Gen8 and are no longer included standard with the
server(except pre-configured/BTO Models). The customer has the choice to not include
rail kits with their server purchase, but it is recommended.
NOTE: HP 2U Ball Bearing Rail Kits provide full serviceability of the server while in the
Rack and include a CMA. HP 2U Friction Rail Kits ARE NOT serviceable in the Rack and
must be removed from the rack and do not include CMA.
NOTE: The HP 1U Gen8 Cable Management Arm is not available when using Friction
Rails. To assist in the installation of the server into the rack an optional installation tool
is available by contacting your local services representative (p/n 695539-001).
Caution: HP recommends that a minimum of two people are required for all Rack
Server installations. Please refer to your installation instructions for proper tools and
number of people to use for any installation.
HP 2U Large Form Factor Ball Bearing Gen8 Rail Kit with CMA
NOTE: HP 2U Ball Bearing Rail Kits provide full serviceability of the server while in the
Rack and include a CMA. HP 2U Friction Rail Kits ARE NOT serviceable in the Rack and
must be removed from the rack and do not include CMA.
663480-B21
HP 2U Small Form Factor Ball Bearing Gen8 Rail Kit with CMA
NOTE: HP 2U Ball Bearing Rail Kits provide full serviceability of the server while in the
Rack and include a CMA. HP 2U Friction Rail Kits ARE NOT serviceable in the Rack and
must be removed from the rack and do not include CMA.
663478-B21
QuickSpecs
HP ProLiant DL385p Generation 8 (Gen8)
Additional Options
DA - 14329 Worldwide — Version 25 — December 13, 2013 Page 48