HP ProLiant ML10 v2 - Standard Features

QuickSpecs
HP ProLiant ML10 v2 Server
Standard Features
c04567802 – DA – 15220 North America — Version 1 — March 30, 2015
Page 3
Processor
One of the following
depending on model
Entry Processors
NOTE: All support up to 1333MT/s DDR3 memory speeds.
Intel® Pentium® G3240 (3.1GHz/2-core/3MB/54W)
Base Processors
NOTE: All support up to 1600MT/s DDR3 memory speeds.
Intel® CoreTM i3-4150 (3.5GHz/2-core/3MB/54W, HT)
Performance Processors
NOTE: All support up to 1600MT/s DDR3 memory speeds.
Intel® Xeon® E3-1220v3 (3.1GHz/4-core/8MB/80W)
Cache Memory
One of the following
depending on model
8MB (1 x 8MB) L3 Cache
NOTE: For Quad-core Xeon processors.
3MB (1 x 3MB) L3 Cache
NOTE: For Dual-core Pentium® CoreTM i3 processors.
Chipset
Intel® C222 Chipset
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.
Upgradeability
Upgradeable to 4 cores
NOTE: Total 2 or 4 cores
Up to 4 DIMM slots available for higher memory capacity
Up to 4 LFF Hard Drive Bays
1 x8 and 1 x16 PCIe 3.0 and 1 x8 and 1x4 PCIe 2.0 I/O slots for additional communications and storage
expansion
Optical Drive Bay (up to 2)
On System Management
Processor
HP iLO (Firmware: HP iLO4)
NOTE: For more information, visit: http://www.hp.com/go/ilo
Memory Protection
ECC
Memory
One of the following
depending on model
Type
HP SmartMemory
DDR3 Unbuffered (UDIMM)
DIMM Slots Available
4
Maximum Capacity
(UDIMM)
32GB (4 x 8GB UDIMM)
NOTE: HP memory from previous generation servers are not fully compatible with the HP ProLiant
ML10 v2 Server.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
1600MT/s or 1333MT/s. Please see Memory Population Table or the Online Memory Configuration Tool
at: http://www.hp.com/go/ddr3memory-configurator.
Network Controller
HP Ethernet 1Gb 2-port 332i Adapter
Expansion Slots
Expansion
Slot #
Technology
Bus Width*
Connector
Width
Form Factor
Notes