HP ProLiant ML10 v2 Server
c04567802 – DA – 15220 North America — Version 1 — March 30, 2015
Software and latest listing of software drivers available for your server, please visit our Support Matrix
at: http://www.hp.com/go/ossupport and our driver download page:
http://www.hp.com/support/ML10v2.
Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
HP iLO 4 On System Management Memory
256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor
One of the following
depending on model
Micro ATX Tower (4U) chassis with feet/bezel:
14.5" (36.82cm) Height x 6.89" (17.5cm) Width x 18.71" (47.52cm) Length
8 SFF Drive Bay Cage:
4.6" (11.72cm) Height x 5.74" (14.57cm) Width x 4.79" (12.16cm) Length
4 LFF Drive Bay Cage:
4.6" (11.72cm) Height x 5.74" (14.57cm) Width x 6.90" (17.54cm) Length
HP iLO Management Engine is a comprehensive set of embedded
management features supporting the complete lifecycle of the server,
from initial deployment, through ongoing management, to service alerting
and remote support. HP iLO Management Engine comes standard on all HP
ProLiant Gen8 servers. The HP iLO Management Engine portfolio includes:
HP iLO: The HP iLO (Integrated Lights-Out) management processor
is the core foundation for the HP iLO Management Engine
HP Agentless Management: Provides built in server health
monitoring and alerting capability without OS agents, that starts
working the moment a power cord and an Ethernet cable are
connected.
HP iLO Mobile App: Enables the ability to access, deploy, and
manage your server anytime from anywhere from select
smartphones and mobile devices. For additional information
please visit: http://www.hp.com/go/ilo/mobileapp
NOTE: For more information, visit: http://www.hp.com/go/ilo or HP iLO
Management Engine technologies whitepaper.
HP Service Pack for
ProLiant (SPP)
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM)
provide a comprehensive approach to firmware and system software
maintenance. Together they provide better operating stability and ensure
maximum uptime. The SPP will be updated at a predictable cadence,
typically coinciding with new HP server hardware launches. By enabling
firmware to be updated online and integrating firmware and system
software updates in one operation, HP SUM and the SPP offer faster
updates of individual servers and dramatically faster updates of entire
BladeSystem enclosures. Further improving system uptime and stability is
the fact that HP provides 12 months of support for each Service Pack for
ProLiant release.