HP ProLiant ML10 v2 Quickspecs

QuickSpecs
HP ProLiant ML10 v2 Server
Standard Features
c04567802 – DA – 15220 North America — Version 1 — March 30, 2015
Page 7
The user experience around HP SUM and the SPP has been improved in
several ways, starting with the web download. A single web page provides
access to a single download containing both the latest version of HP SUM
and the latest SPP. Optional smaller subsets with only specific types of
servers or specific operating systems are offered to save on download
time. The HP SUM application provides a straightforward, intuitive user
interface that guides the user through the steps of discovery, analyses and
update, providing comprehensive information on available updates,
criticality and interdependencies. This information is also available in
reports. By providing the option of multiple local or shared repositories
which can be easily updated from hp.com, HP SUM provides the tools to
optimize stability and consistency throughout the company. While HP SUM
and the SPP recommend the combinations of firmware and system
software that HP has found to be the best practice, the application gives
customers the flexibility to set their own specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific
attention for interaction between firmware, drivers and agents both within
the server as well as in interaction with the BladeSystem enclosure
components (Onboard Administrator and Virtual Connect). This testing
ensures the highest quality as well as providing the input for HP SUM to
deploy updates taking into account all interdependencies, when
determining the correct updates and order of update deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM) can be
downloaded from http://www.hp.com/go/spp/download. More information
can be found: http://www.hp.com/go/SmartUpdate,
http://www.hp.com/go/spp and http://www.hp.com/go/hpsum
Security
Power-on password
Administrator's password
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is
available for three years from date of purchase. Support for software and initial setup is available for
90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack
services or customized service agreements. Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 1-Year Parts. Warranty repairs may be accomplished through the use
of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are
designed for easy replacement. A travel and labor charge will result when customers decline to replace
a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve
added complexity. Customers may choose to have HP replace Optional CSR parts at no charge.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

HP ProLiant ML10 v2 Specifications

General

Bus type	DMI
Stepping	C0
FSB Parity	No
Scalability	1S
Processor cache	8 MB
Processor cores	4
Processor model	E3-1220V3
System bus rate	5 GT/s
Processor series	Intel Xeon E3-1200 v3
Processor socket	LGA 1150 (Socket H3)
Processor codename	Haswell
Motherboard chipset	Intel® C222
Processor frequency	3.1 GHz
Processor cache type	Smart Cache
Processor lithography	22 nm
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	- MHz
Processor boost frequency	3.5 GHz
Processor operating modes	64-bit
ECC supported by processor	Yes
PCI Express configurations	1x8, 1x16, 2x4, 2x8
Supported instruction sets	AVX 2.0, SSE4.1, SSE4.2
Thermal Design Power (TDP)	80 W
Compatible processor series	Intel® Xeon®
Number of processors installed	1
Thermal solution specification	PCG 2013D
Maximum number of PCI Express lanes	16
Memory types supported by processor	DDR3-SDRAM
Memory channels supported by processor	Dual
Memory clock speeds supported by processor	1333, 1600 MHz
Memory bandwidth supported by processor (max)	25.6 GB/s
Maximum internal memory supported by processor	32 GB
HDD size	3.5 \
HDD interface	-
SSD interface	Serial Attached SCSI (SAS)
Total storage capacity	1000 GB
Maximum storage capacity	24 TB
Memory slots	4x DIMM
Internal memory	8 GB
Memory clock speed	1600 MHz
Graphics card	G200
DVD interface type	SATA
Graphics card family	Matrox
Intel® Virtualization Technology (Intel® VT)	VT-d, VT-x
Cabling technology	10/100/1000Base-T(X)
Ethernet interface type	Gigabit Ethernet
Serial ports quantity	0
USB 2.0 ports quantity	2
PCI Express slots version	3.0
Performance management	HP iLO
Compatible operating systems	Microsoft Windows Server\\r Canonical Ubuntu\\r Red Hat Enterprise Linux (RHEL)\\r SUSE Linux Enterprise Server (SLES)\\r VMware
Processor ARK ID	75052
Intel Identity Protection Technology version	1.00
Chassis type	Tower (4U)
Power supply	350 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 9144 m
Storage temperature (T-T)	-30 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 90 %
On-board graphics card model	Not available

Weight and Dimensions

Depth	475.2 mm
Width	175 mm
Height	368.2 mm