Removal and replacement procedures 34
Drive bay configuration
The server supports a maximum of six internal drives. The two upper drive bays are primarily for
removable media drives, while the four lower drive bays are only for hard drives.
Item Description
1 1
st
removable media drive
2
2
nd
removable media drive
3
4
th
SAS/SATA hard drive
4
3
rd
SAS/SATA hard drive
5
2
nd
SAS/SATA hard drive
6 1
st
SAS/SATA hard drive
7 HDD spare screws
8 Removable media drive spare screws
NOTE: The server does not support SAS and SATA HDD models at the same time.
To Next Page
Loading...
